24/7 Sydney Plumbers02 9134 9037
We're Open 24/7
We're Open 24/7

No Hot Water? Fixed or Replaced Today.

4.9/5 from 680+ Sydney reviews

Sydney's hot water specialists. Repairs from $99, same-day replacement, $350 cashback on new systems, every major brand. $0 call-out, 24/7.

Licensed & Insured
4.9 680+ reviews
Mr Flow crocodile mascot, hot water plumber sydney
Licensed & Insured
20+ Years Experience
Same-Day Service
$0 Call-Out Fee
Free · No Obligation

Get a Free Quote: Hot Water Plumber Sydney

Tell us what's going on and we'll call you straight back, usually within 20 minutes. No call-out fee, upfront pricing, same-day where possible.

  • Same-day service or it's free. We don't muck around.
  • Upfront fixed pricing before we start. No nasty surprises.
  • 20+ years fixing Sydney plumbing. Lifetime workmanship guarantee.
  • Available 24/7, including weekends & public holidays.
Smiling Mr Flow Plumbing team member answering a customer phone call
A real person calls you backUsually within 20 minutes, 24/7.

Request A Callback

Takes 60 seconds · We’ll call you back fast

No obligation · Takes 60 seconds · We call you back

Hot Water Plumber Sydney

Why hot water is its own trade

Any plumber can join a pipe. A hot water system is a different animal. It is a pressure vessel, a heating appliance and a piece of licensed plumbing all at once, and getting it wrong is how people end up with a scalded child, a flooded laundry or a gas unit that should never have been signed off.

On a single hot water job the plumber may need to deal with a 240-volt electrical connection, a gas supply and its flue, the cold inlet and its pressure limiting valve, the temperature and pressure relief valve on the tank, and the tempering valve that keeps water at bathroom taps at or below 50 degrees, which is a legal requirement. Each of those has its own rules and its own way of failing. Mr Flow has been doing hot water across Sydney for more than 20 years, and it is a specialty within the business, not a sideline the general plumber picks up on the way past.

Mr Flow plumber servicing a wall-mounted continuous-flow hot water unit in a side passage
The Mr Flow crew, on the job
Good to Know

Repair or replace? An honest answer

The first thing our plumber does is work out whether your system is worth fixing. Repairs start from $99 and cover the common failures: a tripped or burnt-out element, a thermostat, a failed thermocouple or ignition on a gas unit, a weeping relief valve, a tempering valve that has stuck cold. If the tank itself is leaking, the unit is well past its service life, or the repair would cost a large share of a new system, we tell you plainly and quote both options so you can choose.

We service and repair Rheem, Rinnai, Dux, Bosch, Vulcan, Aquamax, Stiebel Eltron and Chromagen. Our vans carry the parts that fail most often on those brands, so most repairs are finished on the first visit.

Same-Day or It’s Free

Book before cut-off and we’re there today, or the call-out is on us. Fixed price before we start, lifetime guarantee after.

  • Licensed & insured
  • $0 call-out, any hour
  • Upfront fixed pricing
  • Lifetime workmanship guarantee
Mr Flow crocodile mascot with the plumbing van
Mr Flow Promise

Same-day hot water replacement

If the tank has to go, you do not need to spend a week showering at the gym. Ring before the daily cut-off and we install the new system the same day, or the call-out is free. That covers removing and disposing of the old unit, fitting the new one with the correct valves and tempering, connecting the electrical or gas supply through the appropriate licensed trade, testing it, and handing you the compliance paperwork. New installs come with $350 cashback and our lifetime workmanship guarantee on top of the manufacturer warranty.

Mr Flow crocodile mascot
What We See

Choosing a hot water system for a Sydney home

Sydney's mild climate and its patchwork of gas and non-gas streets mean there is no single right answer. NSW and federal energy schemes offer incentives on heat pump and solar systems that can bring the up-front cost down. The amounts change and depend on the system and your property, so we will tell you what applies on the day rather than quote a figure here. These are the four options we install most, and who each one suits.

Electric storage

  • Cheapest to buy, simplest to install
  • Highest running costs without solar and timer
  • Suits like-for-like swaps, tight budgets and rentals
Get a quote

Gas storage and continuous flow

  • Gas storage recovers faster than electric
  • Continuous flow means you never run out
  • Needs licensed gas fitting and correct flueing
Get a quote

Heat pump

  • Uses a fraction of standard electric power
  • Higher up-front cost, needs airflow
  • Most current incentive schemes built around it
Get a quote

Solar

  • Roof collectors with gas or electric booster
  • Very low running costs in Sydney sun
  • Depends on roof orientation and space
Get a quote

“Kitchen drain was totally blocked on a Sunday arvo. Harry's team had it cleared within the hour, no weekend surcharge nonsense. Upfront price, great bloke.”

DK
David K.Marrickville, NSW
Google
4.9 from 680+ Google reviews
Why It Matters

Hot water plumbers across Sydney

Mr Flow installs and repairs hot water systems across the whole of Sydney, from apartment blocks in North Sydney to family homes across Blacktown and Greater Western Sydney. There is no call-out fee, the price is fixed before we start, and we run 24/7 for the mornings when the shower goes cold without warning. For the full breakdown of what we repair and install, see our hot water repairs page, or call 02 9134 9037 and talk to someone who does this every day.

We Can Help With

Related Services

Mr Flow plumber repairing an outdoor garden tap and hose connection

General Plumbing

Leaks, water pressure, pipe replacement and maintenance, fixed price and guaranteed for life.

Learn More
Mr Flow plumber at a continuous-flow hot water unit in a side passage

Hot Water Repairs

Electric, gas, solar and continuous flow systems repaired from $99, or replaced with $350 cashback.

Learn More
Mr Flow gas fitter working on a gas meter and regulator outside a Sydney home

Gas Fitting

Licensed gas fitting for cooktops, ovens, heaters, hot water and BBQ points, compliance certificate included.

Learn More
No Fluff. Just Results.

Why Sydney Chooses Mr Flow

We're not the biggest franchise. We're the crew your neighbours actually recommend.

Same-Day or It's Free

Book before cut-off and we'll be there today, or you don't pay the call-out.

60-Minute Response

Emergency? We aim to be at your door within the hour, 24/7.

Licensed & Insured

Fully qualified Sydney plumbers. Every job covered, every time.

Upfront Pricing

You approve a fixed price before we lift a tool. No hidden fees.

20+ Years Experience

Two decades fixing every kind of Sydney plumbing problem. We've seen it all.

Lifetime Guarantee

Our workmanship is backed for life. If it's our fault, we fix it free.

Same-Day Service or It’s Free

If we can’t get to you the same day you book (before cut-off), we waive the call-out. Simple as that. That’s how confident we are.

Book My Same-Day Fix
Sydney-Wide

We Service All of Sydney

From the CBD to the Hills and out to Blacktown, there's a Mr Flow van near you, ready to roll.

Servicing all of Sydney
FAQs

Hot Water Plumber Sydney FAQs

Can you replace my hot water system today?
Yes. Book before the daily cut-off and we install the same day, or the call-out is free. Our vans carry common tank sizes and the valves and fittings to go with them.
How much does a hot water repair cost?
Repairs start from $99, with $0 call-out. The plumber diagnoses the fault on site and gives you a fixed price before any work starts. If a repair is not worth doing, we will say so and quote a replacement instead.
Which brands do you work on?
Rheem, Rinnai, Dux, Bosch, Vulcan, Aquamax, Stiebel Eltron and Chromagen, across electric, gas, heat pump, solar and continuous flow systems.
Should I get a heat pump?
If your home is all-electric or you have solar panels, a heat pump usually gives the lowest running costs and is the system most incentive schemes target. It needs a spot with airflow and costs more up front. We will give you a straight comparison for your house.
Do I need a tempering valve?
Yes. NSW requires tempered water to bathroom fixtures on new installs so the water at the tap cannot scald. We fit and test one with every system we install.
Do you handle the gas and electrical side as well?
Yes. Gas connections and flueing are done as licensed gas fitting, and electrical connections through the appropriate licensed trade. You get one fixed price and the compliance paperwork at the end.
Get My Free Quote
We're Open Now, Responding in Under 20 Mins

No Hot Water? Fixed or Replaced Today.

Talk to a real Sydney plumber now on 02 9134 9037. Same-day service or it's free.

No obligation · Licensed & insured · Lifetime guarantee on all work

Mr Flow crocodile mascot
Call Now Free Quote